闹羊花毒素Ⅲ400MHz二维 ~1H NMR的谱研究

闹羊花毒素Ⅲ的结构较为复杂,采用一维1~H NMR 技术难以对谱做明确的指定。本文通过结合使用400 MHz 1~H-1~H 偶合相关、远程增强型的 1~H-1~H 偶合相关和二维 NOE 技术,对标题化合物的1~H NMR 信号的归属问题作了研究,解决了除前人已明确指定的个别信号外的所有其余信号的鉴别和指定。并且,根据二维 NOE 的实验结果,对其相对构型作了证实。这些结果有助于此类化合物的结构和构型的测定。     

MgB2超导圆线基底交流损耗的计算分析

二硼化镁(MgB2)超导体在非铜氧化物陶瓷超导体中具有最高临界转变温度,给超导应用带来了新的契机.铁与镁不反应,且价格低廉,在需要热处理的超导成材工艺中,常常采用铁作MgB2的基底;然而,这种高磁导率的材料有可能增大基底的损耗.本文采用有限元分析软件ANSYS计算了工频下不同材料基底超导圆线传输交流的基底损耗,分析了基底损耗与电流大小、基底厚度之间的关系,对双层基底的损耗也进行了研究.本文的结果对于适当选取截面尺寸、基底材料和工作电流以期减小交流损耗,具有一定参考意义.     

Improvement of least-squares finite difference method on simulating slider air bearings in head disk systems

Least-squares finite difference (LSFD) method, one of mesh-free methods, is used to solve slider air bearings problem through discritizing the generalized Reynolds equation into nonlinear systems of algebraic equations. Two approximation schemes for the linearization of these equations are presented and compared. And, some new techniques to search supporting points for the reference node in the mesh-free method were proposed and explored. Therefore, these improvements eliminate some potential limitation of the LSFD method previously published and further facilitate its employment in complex slider models. Advanced step slider as an example of negative pressure sliders is simulated and verified using the improved LSFD mesh-free method in head disk systems.     

源气体对沉积的a-C∶F∶H薄膜结构的影响

采用微波电子回旋共振等离子体化学气相沉积(MWPECRCVD)方法,使用不同的源气体(CHF3CH4,CHF3C2H2,CHF3C6H6)体系制备了aC∶F∶H薄膜.由于CH4,C2H2,C6H6气体在等离子体中的分解反应不同导致了薄膜的沉积速率和结构上的差异.红外吸收谱的结果表明,用C6H6CHF3作为源气体沉积的薄膜中几乎不含H,而用C2H2CHF3所沉积的薄膜中的含氟量最高,其相应的CF振动峰位向高频方向偏移.薄膜的真空退火结果表明,aC∶F∶H薄膜的热稳定性除了取决于薄膜的CC键浓度外,还与CC键 关键词： 氟化非晶碳膜 电子回旋共振化学气相沉积 红外吸收光谱     

Linear quivers and the geometric setting of quantum GLn

This paper presents a connection between the defining basis presented by Beilinson-Lusztig-MacPherson [1] in their geometric setting for quantum GL_n and the isomorphism classes of linear quiver representations. More precisely, the positive part of the basis in [1] identifies with the defining basis for the relevant Ringel-Hall algebra; hence, it is a PBW basis in the sense of quantum groups. This approach extends to q-Schur algebras, yielding a monomial basis property with respect to the Drinfeld-Jimbo type presentation for the positive (or negative) part of the q-Schur algebra. Finally, the paper establishes an explicit connection between the canonical basis for the positive part of quantum GL_n and the Kazhdan-Lusztig basis for q-Schur algebras.     

Development and applications of an on-line thermal neutron prompt-gamma element analysis system

This paper introduces the principles, instrumentation, implementation, and industrial applications of an on-line thermal neutron prompt-gamma element analysis system (using a²⁵²Cf neutron source, Am–Be neutron source, or neutron generator). The energy resolution of the system at the H prompt-gamma full-energy photopeak (2.22325 MeV) is 3.6 keV. The concentration measurement error of Al₂O₃, FeO₃, CaO, and SiO₂ is ±0.3%, ±0.1%, ±0.4%, and ±0.4%, respectively. The system has been tested on-site at both the Shandong and the Zhengzhou Aluminium Works. Our preliminary on-site measurements confirm that the stability, reliability, measurement range, and accuracy of the system can meet the requirements of the aluminium production process. Facilitation of this measurement at aluminium plants is expected to reduce plant costs by over 3 million dollars annually through reduced energy consumption, more rapid qualification of pulps being mixed during the production process, and in reduced labor costs.Other participants of Shandong and Zhenghou Aluminium Works are: Wang Aili, Zengshen, Dei Jianguo and Lu Jinnan, Wang Deyu, Jin Hequan.     

3族新的不含紧优与几乎紧优的有向双环网络无限族

给出了3族新的不含紧优与几乎紧优的有向双环网络.     

A uniqueness theorem for a free boundary problem

In this paper, we prove a uniqueness theorem for a free boundary problem which is given in the form of a variational inequality. This free boundary problem arises as the limit of an equation that serves as a basic model in population biology. Apart from the interest in the problem itself, the techniques used in this paper, which are based on the regularity theory of variational inequalities and of harmonic functions, are of independent interest, and may have other applications.

     

Beam Combination using Stimulated Brillouin Scattering for the Ultimate High Power-Energy Laser System Operating at High Repetition Rate over 10 Hz for Laser Fusion Driver

After the laser was invented in 1960, a phase conjugation mirror has been respected to be the most fantastic one for the laser resonator composition because it can compensate any distortions of the laser beams occurred by the many inhomogenuities of the laser media and optical components. Among the many phase conjugation configurations, the stimulated Brillouin scattering phase conjugation mirror is the most simple one and many researchers have tried to utilize it to develop high power/energy laser systems. For realizing a high energy/power laser system the thermal problem is the most difficult to solve, and some researchers suggested a beam combination technique to reduce the thermal load of the big laser media to many small sized ones. To accomplish the beam combination using stimulated Brillouin scattering phase conjugation mirrors (SBS-PCMs), it is necessary to lock/control the phases of the SBS-PCMs. And some researchers have developed several ways for it, but they can lock the phases of a limited number of beams overlapped at the foci less than 5, or lock the phases by back-seeding technique but it loses the phase conjugation characteristics. For realization of the laser fusion driver, it is necessary to combine more than 10 or 100 beams. And the authors have developed recently a new phase controlling/locking technique which is isolated and independent totally from other beams and it can be applied to an unlimited number of beams in principle.     

Synthesis of TiO2–SiO2/polymer core–shell microspheres with a microphase‐inversion method

A novel microphase‐inversion method was proposed for the preparation of TiO₂–SiO₂/poly(methyl methacrylate) core–shell nanocomposite particles. The inorganic–polymer nanocomposites were first synthesized via a free‐radical copolymerization in a tetrahydrofuran solution, and the poor solvent was added slowly to induce the microphase separation of the nanocomposite and result in the formation of nanoparticles. The average particle sizes of the microspheres ranged from 70 to 1000 nm, depending on the reaction conditions. Transmission electron microscopy and scanning electron microscopy indicated a core–shell morphology for the obtained microspheres. Thermogravimetric analysis and X‐ray photoelectron spectroscopy measurements confirmed that the surface of the nanocomposite microspheres was polymer‐rich, and this was consistent with the core–shell morphology. The influence of the synthetic conditions, such as the inorganic composition and the content of the crosslinking monomer, on the particle properties was studied in detail. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3911–3920, 2006